SA‑53/SA‑53M
Pipe, Steel, Black and Hot‑Dipped, Zinc‑Coated, Welded and Seamless
SA‑20/SA‑20M
General Requirements for Steel Plates for Pressure Vessels
SA‑29/SA‑29M
General Requirements for Steel Bars, Carbon and Alloy, Hot‑Wrought
SA‑1016/SA‑1016M
General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
SA‑1017/SA‑1017M
Pressure Vessel Plates, Alloy‑Steel, Chromium‑Molybdenum‑Tungsten
SA‑6/SA‑6M
General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
SA‑20/SA‑20M
General Requirements for Steel Plates for Pressure Vessels
SA‑29/SA‑29M
General Requirements for Steel Bars, Carbon and Alloy, Hot‑Wrought
SA‑31
Steel Rivets and Bars for Rivets, Pressure Vessels
SA‑36/SA‑36M
Carbon Structural Steel
SA‑47/SA‑47M
Ferritic Malleable Iron Castings
SA‑53/SA‑53M
Pipe, Steel, Black and Hot‑Dipped, Zinc‑Coated, Welded and Seamless
SA‑105/SA‑105M
Carbon Steel Forgings for Piping Applications
SA‑106/SA‑106M
Seamless Carbon Steel Pipe for High‑Temperature Service
SA‑134/SA‑134M
Pipe, Steel, Electric‑Fusion (ARC)‑Welded (Sizes NPS 16 and Over)
SA‑135/SA‑135M
Electric‑Resistance‑Welded Steel Pipe
SA‑178/SA‑178M
Electric‑Resistance‑Welded Carbon Steel and Carbon‑Manganese Steel Boiler and Superheater Tubes
SA‑179/SA‑179M
Seamless Cold‑Drawn Low‑Carbon Steel Heat‑Exchanger and Condenser Tubes
SA‑181/SA‑181M
Carbon Steel Forgings, for General‑Purpose Piping
SA‑182/SA‑182M
Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High‑Temperature Service
SA‑192/SA‑192M
Seamless Carbon Steel Boiler Tubes for High‑Pressure Service
SA‑193/SA‑193M
Alloy‑Steel and Stainless Steel Bolting for High‑Temperature or High‑Pressure Service and Other Special Purpose Applications
SA‑194/SA‑194M
Carbon and Alloy Steel Nuts for Bolts for High‑Pressure or High‑Temperature Service, or Both
SA‑203/SA‑203M
Pressure Vessel Plates, Alloy Steel, Nickel
SA‑204/SA‑204M
Pressure Vessel Plates, Alloy Steel, Molybdenum
SA‑209/SA‑209M
Seamless Carbon‑Molybdenum Alloy‑Steel Boiler and Superheater Tubes
SA‑210/SA‑210M
Seamless Medium‑Carbon Steel Boiler and Superheater Tubes
SA‑213/SA‑213M
Seamless Ferritic and Austenitic Alloy‑Steel Boiler, Superheater, and Heat‑Exchanger Tubes
SA‑214/SA‑214M
Electric‑Resistance‑Welded Carbon Steel Heat‑Exchanger and Condenser Tubes
SA‑216/SA‑216M
Steel Castings, Carbon, Suitable for Fusion Welding for High‑Temperature Service
SA‑217/SA‑217M
Steel Castings, Martensitic Stainless and Alloy, for Pressure‑Containing Parts, Suitable for High‑Temperature Service
SA‑225/SA‑225M
Pressure Vessel Plates, Alloy Steel, Manganese‑Vanadium‑Nickel
SA‑231/SA‑231M
Chromium‑Vanadium Alloy Steel Spring Wire
SA‑232/SA‑232M
Chromium‑Vanadium Alloy Steel Valve Spring Quality Wire
SA‑234/SA‑234M
Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High‑Temperature Service
SA‑240/SA‑240M
Chromium and Chromium‑Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
SA‑249/SA‑249M
Welded Austenitic Steel Boiler, Superheater, Heat‑Exchanger, and Condenser Tubes
SA‑250/SA‑250M
Electric‑Resistance‑Welded Ferritic Alloy‑Steel Boiler and Superheater Tubes
SA‑263
Stainless Chromium Steel‑Clad Plate
SA‑264
Stainless Chromium‑Nickel Steel‑Clad Plate
SA‑265
Nickel and Nickel‑Base Alloy‑Clad Steel Plate
SA‑266/SA‑266M
Carbon Steel Forgings for Pressure Vessel Components
SA‑268/SA‑268M
Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
SA‑276/SA‑276M
Stainless Steel Bars and Shapes
SA‑278/SA‑278M
Gray Iron Castings for Pressure‑Containing Parts for Temperatures up to 650°F (350°C)
SA‑283/SA‑283M
Low and Intermediate Tensile Strength Carbon Steel Plates
SA‑285/SA‑285M
Pressure Vessel Plates, Carbon Steel, Low‑ and Intermediate‑Tensile Strength
SA‑299/SA‑299M
Pressure Vessel Plates, Carbon Steel, Manganese‑Silicon
SA‑302/SA‑302M
Pressure Vessel Plates, Alloy Steel, Manganese‑Molybdenum and Manganese‑Molybdenum‑Nickel
SA‑307
Carbon Steel Bolts and Studs, 60,000 PSI Tensile Strength
SA‑311/SA‑311M
Cold‑Drawn, Stress‑Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
SA‑312/SA‑312M
Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
SA‑320/SA‑320M
Alloy‑Steel and Stainless Steel Bolting for Low‑Temperature Service
SA‑325
Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
SA‑333/SA‑333M
Seamless and Welded Steel Pipe for Low‑Temperature Service and Other Applications With Required Notch Toughness
SA‑334/SA‑334M
Seamless and Welded Carbon and Alloy‑Steel Tubes for Low‑Temperature Service
SA‑335/SA‑335M
Seamless Ferritic Alloy‑Steel Pipe for High‑Temperature Service
SA‑336/SA‑336M
Alloy Steel Forgings for Pressure and High‑Temperature Parts
SA‑350/SA‑350M
Carbon and Low‑Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
SA‑351/SA‑351M
Castings, Austenitic, for Pressure‑Containing Parts
SA‑352/SA‑352M
Steel Castings, Ferritic and Martensitic, for Pressure‑Containing Parts, Suitable for Low‑Temperature Service
SA‑353/SA‑353M
Pressure Vessel Plates, Alloy Steel, Double‑Normalized and Tempered 9% Nickel
SA‑354
Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
SA‑358/SA‑358M
Electric‑Fusion‑Welded Austenitic Chromium‑Nickel Stainless Steel Pipe for High‑Temperature Service and General Applications
SA‑369/SA‑369M
Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High‑Temperature Service
SA‑370
Test Methods and Definitions for Mechanical Testing of Steel Products
SA‑372/SA‑372M
Carbon and Alloy Steel Forgings for Thin‑Walled Pressure Vessels
SA‑376/SA‑376M
Seamless Austenitic Steel Pipe for High‑Temperature Service
SA‑387/SA‑387M
Pressure Vessel Plates, Alloy Steel, Chromium‑Molybdenum
SA‑395/SA‑395M
Ferritic Ductile Iron Pressure‑Retaining Castings for Use at Elevated Temperatures
SA‑401/SA‑401M
Steel Wire, Chromium‑Silicon Alloy
SA‑403/SA‑403M
Wrought Austenitic Stainless Steel Piping Fittings
SA‑409/SA‑409M
Welded Large Diameter Austenitic Steel Pipe for Corrosive or High‑Temperature Service
SA‑414/SA‑414M
Steel, Sheet, Carbon, and High‑Strength, Low‑Alloy for Pressure Vessels
SA‑420/SA‑420M
Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low‑Temperature Service
SA‑423/SA‑423M
Seamless and Electric‑Welded Low‑Alloy Steel Tubes
SA‑426/SA‑426M
Centrifugally Cast Ferritic Alloy Steel Pipe for High‑Temperature Service
SA‑437/SA‑437M
Stainless and Alloy‑Steel Turbine‑Type Bolting Specially Heat Treated for High‑Temperature Service
SA‑439/SA‑439M
Austenitic Ductile Iron Castings
SA‑449
Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
SA‑450/SA‑450M
General Requirements for Carbon and Low Alloy Steel Tubes
SA‑451/SA‑451M
Centrifugally Cast Austenitic Steel Pipe for High‑Temperature Service
SA‑453/SA‑453M
High‑Temperature Bolting, With Expansion Coefficients Comparable to Austenitic Stainless Steels
SA‑455/SA‑455M
Pressure Vessel Plates, Carbon Steel, High‑Strength Manganese
SA‑476/SA‑476M
Ductile Iron Castings for Paper Mill Dryer Rolls
SA‑479/SA‑479M
Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
SA‑480/SA‑480M
General Requirements for Flat‑Rolled Stainless and Heat‑Resisting Steel Plate, Sheet, and Strip
SA‑484/SA‑484M
General Requirements for Stainless Steel Bars, Billets, and Forgings
SA‑487/SA‑487M
Steel Castings Suitable for Pressure Service
SA‑508/SA‑508M
Quenched and Tempered Vacuum‑Treated Carbon and Alloy Steel Forgings for Pressure Vessels
SA‑513
Electric‑Resistance‑Welded Carbon and Alloy Steel Mechanical Tubing
SA‑515/SA‑515M
Pressure Vessel Plates, Carbon Steel, for Intermediate‑ and Higher‑Temperature Service
SA‑515/SA‑515M
Pressure Vessel Plates, Carbon Steel, for Intermediate‑ and Higher‑Temperature Service
SA‑516/SA‑516M
Pressure Vessel Plates, Carbon Steel, for Moderate‑ and Lower‑Temperature Service
SA‑517/SA‑517M
Pressure Vessel Plates, Alloy Steel, High‑Strength, Quenched and Tempered
SA‑522/SA‑522M
Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low‑Temperature Service
SA‑524/SA‑524M
Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
SA‑530/SA‑530M
General Requirements for Specialized Carbon and Alloy Steel Pipe
SA‑533/SA‑533M
Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese‑Molybdenum and Manganese‑Molybdenum‑Nickel
SA‑537/SA‑537M
Pressure Vessel Plates, Heat‑Treated, Carbon‑Manganese‑Silicon Steel
SA‑540/SA‑540M
Alloy‑Steel Bolting for Special Applications
SA‑541/SA‑541M
Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
SA‑542/SA‑542M
Pressure Vessel Plates, Alloy Steel, Quenched‑and‑Tempered, Chromium‑Molybdenum, and Chromium‑Molybdenum‑Vanadium
SA‑543/SA‑543M
Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Nickel‑Chromium‑Molybdenum
SA‑553/SA‑553M
Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, 7, 8, and 9% Nickel
SA‑556/SA‑556M
Seamless Cold‑Drawn Carbon Steel Feedwater Heater Tubes
SA‑557/SA‑557M
Electric‑Resistance‑Welded Carbon Steel Feedwater Heater Tubes
SA‑562/SA‑562M
Pressure Vessel Plates, Carbon Steel, Manganese‑Titanium for Glass or Diffused Metallic Coatings
SA‑563
Carbon and Alloy Steel Nuts
SA‑564/SA‑564M
Hot‑Rolled and Cold‑Finished Age‑Hardening Stainless Steel Bars and Shapes
SA‑568/SA‑568M
Steel, Sheet, Carbon, Structural, and High‑Strength, Low‑Alloy, Hot‑Rolled and Cold‑Rolled, General Requirements
SA‑572/SA‑572M
High‑Strength Low‑Alloy Columbium‑Vanadium Structural Steel
SA‑574
Alloy Steel Socket‑Head Cap Screws
SA‑587
Electric‑Resistance‑Welded Low‑Carbon Steel Pipe for the Chemical Industry
SA‑592/SA‑592M
High‑Strength Quenched and Tempered Low‑Alloy Steel Forged Fittings and Parts for Pressure Vessels
SA‑609/SA‑609M
Castings, Carbon, Low‑Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
SA‑612/SA‑612M
Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
SA‑638/SA‑638M
Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High‑Temperature Service
SA‑645/SA‑645M
Pressure Vessel Plates, 5% and 5½% Nickel Alloy Steels, Specially Heat Treated
SA‑649/SA‑649M
Forged Steel Rolls, Used for Corrugating Paper Machinery
SA‑656/SA‑656M
Hot‑Rolled Structural Steel, High‑Strength Low‑Alloy Plate With Improved Formability
SA‑660
Centrifugally Cast Carbon Steel Pipe for High‑Temperature Service
SA‑803/SA‑803M
Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes
SA‑813/SA‑813M
Single‑ or Double‑Welded Austenitic Stainless Steel Pipe
SA‑814/SA‑814M
Cold‑Worked Welded Austenitic Stainless Steel Pipe
SA‑815/SA‑815M
Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
SA‑832/SA‑832M
Pressure Vessel Plates, Alloy Steel, Chromium‑Molybdenum‑Vanadium
SA‑834
Common Requirements for Iron Castings for General Industrial Use
SA‑836/SA‑836M
Titanium‑Stabilized Carbon Steel Forgings for Glass‑Lined Piping and Pressure Vessel Service
SA‑841/SA‑841M
Steel Plates for Pressure Vessels, Produced by Thermo‑Mechanical Control Process (TMCP)
SA‑874/SA‑874M
Ferritic Ductile Iron Castings Suitable for Low‑Temperature Service
SA‑905
Steel Wire, Pressure Vessel Winding
SA‑941
Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
SA‑960/SA‑960M
Common Requirements for Wrought Steel Piping Fittings
SA‑961/SA‑961M
Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
SA‑962/SA‑962M
Common Requirements for Bolting Intended for Use at Any Temperature From Cryogenic to the Creep Range
SA‑965/SA‑965M
Steel Forgings, Austenitic, for Pressure and High‑Temperature Parts
SA‑985/SA‑985M
Steel Investment Castings General Requirements, for Pressure‑Containing Parts
SA‑988/SA‑988M
Hot Isostatically‑Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High‑Temperature Service
SA‑989/SA‑989M
Hot Isostatically‑Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High‑Temperature Service
SA‑995/SA‑995M
Castings, Austenitic‑Ferritic (Duplex) Stainless Steel, for Pressure‑Containing Parts
SA‑999/SA‑999M
General Requirements for Alloy and Stainless Steel Pipe
SA‑1008/SA‑1008M
Steel, Sheet, Cold‑Rolled, Carbon, Structural, High‑Strength Low‑Alloy and High‑Strength Low‑Alloy With Improved Formability
SA‑1010/SA‑1010M
Higher‑Strength Martensitic Stainless Steel Plate, Sheet, and Strip
SA‑1011/SA‑1011M
Steel, Sheet and Strip, Hot‑Rolled, Carbon, Structural, High‑Strength Low‑Alloy, High‑Strength Low‑Alloy With Improved Formability, and Ultra‑High‑Strength
SA‑1016/SA‑1016M
General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
SA‑1017/SA‑1017M
Pressure Vessel Plates, Alloy‑Steel, Chromium‑Molybdenum‑Tungsten