| SAE J3303_202510 : 2025 | Lithium and Lithium-Ion Cell and Battery Containment Performance Recommended Practice |
| SAE AMS6907D : 2025 | Titanium Alloy Bars and Forging Stock, 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo, Duplex Annealed |
| SAE AMS6277K : 2025 | Steel, Bars, Forgings, Mechanical Tubing and Forging Stock, 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620), Premium Aircraft Quality, Vacuum Arc or Electroslag Remelted |
| SAE AMS5810C : 2025 | Steel, Corrosion- and Heat-Resistant, Flat Wire, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V (A286), 1800 °F (982 °C) Solution Treated, Cold Drawn or Cold Rolled and Aged, Consumable Electrode Remelted |
| SAE AMS5794G : 2025 | Iron Alloy, Corrosion- and Heat-Resistant, Welding Wire, 31Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N (N-155), Annealed |
| SAE AMS5762H : 2025 | Steel, Corrosion-Resistant, Bars, Wire, Forgings and Forging Stock, 5.8Mn - 17Cr - 5.8Ni - 2.0Cu - 0.26S (203 EZ), Free Machining, Solution Heat Treated |
| SAE AMS5500H : 2025 | Steel, Corrosion-Resistant, Laminated, Sheet, Surface Bonded (SAE 302) |
| SAE AMS4917L : 2025 | Titanium Alloy Sheet, Strip, and Plate 13.5V - 11Cr - 3.0Al Solution Heat Treated |
| SAE AMS4731E : 2025 | Nickel-Copper Alloy Wire and Ribbon, Corrosion-Resistant, 67Ni - 31Cu (Monel® 400), Annealed |
| SAE AMS4291K : 2025 | Aluminum Alloy, Die Castings 8.5Si - 3.5Cu (A380.0-F) As Cast |
| SAE AS392D : 2025 | Altimeter, Pressure Actuated Sensitive Type |
| SAE AMS4260H : 2025 | Aluminum Alloy, Investment Castings, 7.0Si - 0.32Mg (356.0-T6), Solution and Precipitation Heat Treated |
| SAE AMS4186F : 2025 | Aluminum Alloy Bars, Rods, and Wire, Rolled or Cold Finished, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-F), As Fabricated, or When Specified, Annealed (7075-O) |
| SAE AMS2425G : 2025 | Plating, Gold, for Thermal Control |
| SAE J2967_202509 : 2025 | Ready-Mixed Concrete Truck Recommended Practice |
| SAE J1939DA_202509 : 2025 | J1939 Digital Annex |
| SAE J1594_202510 : 2025 | Vehicle Aerodynamics Terminology |
| SAE AS83519/5B : 2025 | SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT WITH PREINSTALLED BRAID, NI PLATED, CLASS 1, ROHS |
| SAE AS81824F : 2025 | Splice, Electric, Crimp, Copper, Environment Resistant |
| SAE AS6847 : 2025 | Fitting End, Bulkhead, Cone, Design Standard |
| SAE AS4679C : 2025 | WASHER, FLAT, SHORT FLARELESS |
| SAE AS4659B : 2025 | FITTING END, EXTERNAL THREAD, SHORT FLARELESS, DESIGN STANDARD |
| SAE AS4658A : 2025 | FITTING END, EXTERNAL THREAD, SHORT FLARELESS, DESIGN STANDARD |
| SAE AS4510/1A : 2025 | Fittings, Weld to 24° Cone Flareless, Fluid Connection |
| SAE AS4340D : 2025 | FITTING, BUSHING, SCREW THREAD REDUCER, FOR SEAL RING |
| SAE AS7140 : 2025 | Common, Open Data Exchange Format for Rotorcraft Health and Usage Monitoring Systems (CODEX-HUMS) |
| SAE AIR5552A : 2025 | Development and Qualification of Composite Landing Gears |
| SAE AMS4215K : 2025 | Aluminum Alloy, Castings, 5.0Si - 1.2Cu - 0.50Mg (C355.0-T6), Solution and Precipitation Heat Treated |
| SAE AMS4281H : 2025 | Aluminum Alloy Castings, Permanent Mold, 5.0Si - 1.2Cu - 0.50Mg (355.0-T6), Solution and Precipitation Heat Treated |
| SAE AMS4975R : 2025 | Titanium Alloy, Bars, Wire, and Rings, 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 0.08Si, Solution and Precipitation Heat Treated |
| SAE AMS4976N : 2025 | Titanium Alloy, Forgings, 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 08Si, Solution and Precipitation Heat Treated |
| SAE AMS5388L : 2025 | Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings, 53.3Ni - 16.5Cr - 17Mo - 4.5W - 5.8Fe - 0.40V (CW-12MW), As-Cast |
| SAE AMS5638H : 2025 | Steel, Corrosion-Resistant, Bars, Forgings and Forging Stock, 0.14S - 18Cr - 9.5Ni - 0.50Mo - 0.80Al (303 MA), Free-Machining; Swaging or Upsetting, Solution Heat Treated |
| SAE AMS5790F : 2025 | Steel, Corrosion- and Heat-Resistant, Welding Wire, 20Cr - 10Ni - 0.75Cb (347), High Ferrite Grade |
| SAE AMS6312L : 2025 | Steel Bars, Forgings, Mechanical Tubing and Forging Stock, 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640), Aircraft Quality |
| SAE AMS6421J : 2025 | Steel, Bars, Forgings, Mechanical Tubing and Forging Stock, 0.80Cr - 0.85Ni - 0.20Mo - 0.003B (0.35 - 0.40C) (Modified 98B37), Aircraft Quality |
| SAE J3097Z26_202509 : 2025 | DRAFT - Standard for Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways - Safety Standard |
| SAE J3101-5_202509 : 2025 | Hardware Protected Security Environment - GlobalPlatform Technologies Information Report |
| SAE J2847/5_202509 : 2025 | Communication Between Plug-In Vehicles and Customers |
| SAE AMS2759/12C : 2025 | Automated Gaseous Nitrocarburizing Controlled by Potentials |
| SAE AMS3819E : 2025 | Cloths, Cleaning, For Aircraft Primary and Secondary Structural Surfaces |
| SAE AMS4229H : 2025 | Aluminum Alloy Castings, High Strength, 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T7), Solution Heat Treated and Overaged |
| SAE AMS4880E : 2025 | Aluminum Bronze Alloy, Centrifugal and Continuous-Cast Castings, 81.5Cu - 10.3Al - 5.0Ni - 2.8Fe, Quench Hardened and Temper Annealed (TQ50) |
| SAE AMS5622H : 2025 | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forging, Rings and Heading, 16Cr - 4.0Ni - 0.30Cb - 4.0Cu (17-4 PH®), Solution Heat Treated, Precipitation Hardenable, Premium Aircraft Quality, Consumable Electrode |
| SAE AMS6477E : 2025 | Steel, Bars, Forgings, Mechanical Tubing and Forging Stock, 0.80Cr (0.90 - 1.03C), For Bearing Applications |
| SAE AS1503B : 2025 | HOSE, AIR DUCT, FLEXIBLE, HELICAL, METALLIC WIRE, SUPPORTED (COVERED), SELF-EXTINGUISHING |
| SAE AS21439E : 2025 | BEARING, ROLLER, NEEDLE, DOUBLE ROW, HEAVY DUTY, TRACK ROLLER, SEALED, TYPE VI, INCH |
| SAE J2490_202509 : 2025 | SAE No. 2 Friction Test Machine µPVT Test |
| SAE J3327_202509 : 2025 | Electric Vehicle (EV) Battery Traceability Record |
| SAE J1634_202508 : 2025 | Battery Electric Vehicle Energy Consumption and Range Test Procedure |
| SAE AS2592B : 2025 | Flap Assemblies, Rotary Flap Peening |
| SAE AS3503A : 2025 | Insert, Screw Thread, Self Locking Plastic Locking Device, Solid Film Lubricated, Self-Broaching Keys, Oversize UNS S66286 |
| SAE AS9245C : 2025 | PIN, COTTER - CRES, UNS S32100, AS7211 |
| SAE J3237_202508 : 2025 | Dynamic Driving Task Assessment (DA) Metrics for Automated Driving Systems |
| SAE AMS4242D : 2025 | Aluminum Alloy, Castings 4.7Cu - 0.60Ag - 0.35Mn - 0.25Mg - 0.25Ti (B201.0-T7) Solution Heat Treated and Overaged |
| SAE AMS4261H : 2025 | Aluminum Alloy Castings, Investment, 7.0Si - 0.32Mg (356.0-T51), Precipitation Heat Treated |
| SAE AMS4482B : 2025 | Cast Aluminum Alloy Composite 4.6Cu - 3.4Ti - 1.4B - 0.75Ag - 0.27Mg (205.0/TiB2/3p-T7P) Sand Cast, Solution, and Precipitation Heat Treated |
| SAE AMS4970M : 2025 | Titanium Alloy Bars, Wire, and Forgings 7Al - 4Mo Solution and Precipitation Heat Treated |
| SAE AMS5070L : 2025 | Steel, Bars, Forgings and Forging Stock, 0.18 - 0.23C (SAE 1022) |
| SAE AMS5396G : 2025 | Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings, 65Ni - 28Mo - 5.5Fe - 0.40V (N-12MV and Hastelloy® B), As-Cast |
| SAE AMS8660A : 2025 | Silicone Compound, NATO Code Number S-736 |
| SAE AS5259/4A : 2025 | CRIMPING TOOL AND ACCESSORIES, REMOTE CRIMP HEAD, HYDRAULIC, WIRE SIZE 8 TO 00 UN-INSULATED AND 8 THRU 2 INSULATED CRIMP BARRELS |
| SAE J2682_202508 : 2025 | Connections for General Use and Fluid Power - Test Methods - Threadless Connections |
| SAE J1979DA_202508 : 2025 | J1979-DA, Digital Annex of E/E Diagnostic Test Modes |
| SAE J1865_202508 : 2025 | Dimensional Compatibility for Commercial Vehicles Fitment of Complete Wheels in Drum Brake Applications - Truck and Bus |
| SAE J1701_202508 : 2025 | Torque-Tension Tightening for Fasteners (Inch and Metric) |
| SAE J1542_202508 : 2025 | Laboratory Testing of Vehicle and Industrial Heat Exchangers for Thermal Cycle Durability |
| SAE J1128_202508 : 2025 | Low Voltage Primary Cable |
| SAE J1127_202508 : 2025 | Low Voltage Battery Cable |
| SAE J641_202508 : 2025 | Hydrodynamic Drives Terminology |
| SAE AS5756/4C : 2025 | CABLE, ELECTRICAL, 600 VOLTS, PORTABLE, MULTICONDUCTOR, OZONE RESISTANT |
| SAE ARP5151B : 2025 | Safety Assessment of General Aviation Airplanes and Rotorcraft in Commercial Service |
| SAE AS1913E : 2025 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 PSI, LIGHTWEIGHT, BEAM SEAL, 45 TO 90° |
| SAE ARP8701 : 2025 | Aircraft Deicing Vehicle - Towable Unit |
| SAE AS31371C : 2025 | CONNECTOR, PLUG, ELECTRIC, SOLDER TYPE, PUSH-PULL COUPLING SERIES 1 (CLASS E, P, AND J) |